Service
Powder Coating in Auckland
Dry powder applied electrostatically and cured in the oven, for a uniform finish that resists chipping, scratching and corrosion in a way wet paint does not.
A hard, even finish in the colour you pick
We powder coat at our family-owned shop at 7 Neilpark Drive, East Tamaki, Auckland. Dry powder is applied electrostatically, then cured in the oven, and what comes out is a uniform, hard-wearing surface that resists chipping, scratching and corrosion better than wet paint does.
Everything goes back to bare metal first. Powder never goes over an old finish, because anything left underneath, like lifting paint, old lacquer or corrosion, will lift the new coat later. Depending on the part, that means paint stripping, sandblasting, shot blasting or vapour blasting before it is coated.
We coat alloy wheels and centre caps, brake calipers and carriers, engine and cam covers, motorbike frames, and brass, aluminium and stainless steel parts, from single one-offs to big jobs. We use Dulux and Interpon powders, with 205 Dulux and Prismatic colours shown on this site, and we can order from over 6,500 Prismatic Powders shades out of the USA. A Prismatic colour we do not have in stock takes about two weeks to bring in.
Wheel powder coating Brake caliper powder coating Motorcycle powder coating Sandblasting Vapour blasting Paint stripping
What it suits
- Alloy wheels and centre caps
- Brake calipers and carriers
- Engine and cam covers
- Motorbike frames
- Brass, aluminium and stainless steel parts
- Big jobs and single one-offs
Questions
Powder Coating questions we get asked
Is powder better than paint?
It is tougher. Powder coating stands up to chips, scratches and everyday wear and tear better than wet paint does, and done properly over clean bare metal it resists corrosion too.
Can you coat over an existing finish?
No. Everything goes back to bare metal first.
What colours can I choose?
We use Dulux and Interpon powders, with 205 Dulux and Prismatic colours shown on this site, and we can order from over 6,500 Prismatic Powders shades out of the USA. A Prismatic colour we do not have in stock takes about two weeks to bring in.
The rest of what we do
Other services
Contact Us
Tell us about the part
A full set of wheels in one colour has a set price, and so do rocker covers, and you can book your drop-off day online. For anything else, drop it off or send a few photos and we will come back to you with a price.
- 09 636 6421
- info@powderpros.co.nz
- 7 Neilpark Drive, East Tamaki, Auckland 2013
Or just bring it in.
7 Neilpark Drive, East Tamaki. We can look at the item on the spot.
Get directions