Motorcycle Powder Coating in Auckland

Yes. Frames are on the list, along with wheels and engine covers. Rubber, plastic and electronics can't go through the stripper or the oven, so they all have to come off first. Then, like everything we coat, the frame goes back to bare metal before the colour goes on. Tell us whether it will come in already stripped down or in one piece, or ring us on 09 636 6421 before you pull the bike apart.

Yes, if you ask us to. Tell us when you drop the frame off, and point out the numbers or stamps you want kept clear of powder.

Yes. Bike wheels go back to bare metal, then the colour you pick, the same as car wheels. The tyre, valve and any sensors have to come off first, because rubber, plastic and electronics can't go through the stripper or the oven. Send photos through the form on this page, or bring the wheels in, and we'll come back to you with a price.

Yes. Engine covers can be powder coated in a colour. Cast alloy cases and covers can also be vapour blasted instead, which leaves an even satin finish on the bare metal. Either way, point out the gasket faces, sealing faces and threads when you drop them off, so they're kept clear.

Yes, with masking. One colour stops on a clean line where the next one starts. Tell us which parts you want in which finish when you bring them in.

Our site shows 205 colours from Dulux and Prismatic. We also use Interpon, and we can order from over 6,500 Prismatic Powders shades out of the USA. A screen can't show a powder properly, so ask to see a sample before you decide.

The price depends on what the parts are, how many there are, what they're made of, their size and the condition they arrive in. Send up to six photos through the form on this page, or drop them in to 7 Neilpark Drive, East Tamaki, and we'll come back to you with a price.